Skip to content
en
USD

FREE SHIPPING ON ORDERS OVER $400* - $14.99 Flat Rate Shipping for Orders Below 150lbs!

Eligible for Free Shipping on Orders of $400 or More

Pearl Coating™ 16oz Sublimation Stainless Steel Tumbler - Pack of 6

Regular price $59.94

B-TBR-SS-WH-16

  • Pearl Coating™ 16oz Sublimation Stainless Steel Tumbler - Pack of 6 - Joto Imaging Supplies US
  • Pearl Coating™ 16oz Sublimation Stainless Steel Tumbler - Pack of 6 - Joto Imaging Supplies US

Joto's 16oz Stainless Steel Tumblers are a popula alternative to disposable cups, more effectively holding the heat or keeping drinks cool in a durable, easy to clean, and most importantly, reusable take anywhere solution. You will need a 17oz Latte Mug in order to sublimate them using a mug press.

Stamps Shipping Image
Pearl Coating™ 16oz Sublimation Stainless Steel Tumbler - Pack of 6 - Joto Imaging Supplies US
Pearl Coating™ 16oz Sublimation Stainless Steel Tumbler - Pack of 6

Keep your liquids hot with Joto's stylish 16oz Stainless steel tumbler specially coated for sublimation printing. With an easy-to-use pop-up top, you can enjoy your coffee or tea hours after they're made. Imprint the tumbler with your favorite image.

  • Hand wash only
  • Dimensions: W3.5" x H6.69" (9cm x 17cm)
  • Recommended Printing Area: 3.5" x 6.1" (9cm x15.5cm)
  • Available in White or Silver

Printing Method:

  • Joto Digital Mug Press - Single Station Includes 2 Elements - 11oz/15oz Mug Element
  • Joto Digital Mug Press -Single Station Includes 4 Elements - 11oz/15oz Mug Element
  • Joto Digital Mug Press -Single Station Includes 7 Elements - 11oz/15oz Mug Element
  • Joto Digital Mug Press - Dual Station Includes 5 Elements- 11oz/15oz Mug Element 
  • Joto Digital Mug Press - 5 Stations - 11oz/15oz Mug Element
  • Convection Oven - Requires a Shrink Sleeve/Film. We recommend W 5.9” x H 9.84” (P-SUB-SF-150250).
    Please remove the lid before placing it in a convection oven
Brand Pearl Coating™
Compatible Technology Sublimation
Dishwasher Safe No
Dye Blocking No
Experience Pack Text Pack
FCC Attribute Yes
Ink Configuration CMY&HDK
Microwave Safe No
Mug Element 17oz Latte
Printable Area 3.5" x 6.1" (9cm x15.5cm)
Recommended Shrink Sleeve W 5.9” x H 9.84” (P-SUB-SF-150250)
Self-Weeding No
SIP Attribute Yes
Size 16oz
Unit Sell pack
Peel Immediate
Equipment Mug Press or Convection Oven
Image Mirror
Pressure Light
Application Temperature
Time 160 seconds
Mug Element 17oz Latte
Mug Press Imaging Instructions
  1. Tape imaged sublimation paper onto your mug. Place the image toward the tumbler.
  2. Ensure that you have set the correct temperature & time for your mug press model.
  3. Place the tumbler into your mug press. Ensure the mug press has reached the temperature.
  4. Close Mug Press.
  5. a) Mug presses with idle temperatures will start raising the temperature until press temperature is reached. Then it will start counting down.
    b) Mug presses without an idle temperature will start counting down immediately.
    Note: It is normal to see the temperature lower when you close the press. This has been accounted for.
  6. Once pressing is done, immediately peel off sublimation paper.
  7.  Dunk in warm water. Leave on Table to dry.

For time and temperature, please follow the instructions that came with your mug press. 
If you bought a mug press from us, the suggested time and temperature for our Single Station, Double Station, and Multi-Station Mug Press are listed above.
For any other mug presses, please click on the SUPPORT, DOWNLOADS & TEMPLATES tab, and download the instructions from there.

Convection Oven Instructions

If using a convection oven, recommended a Shrink Film/Sleeve 150x250mm 50 Sleeves Per Pack (W 5.9" x H 9.84").

Press Temperature: 320°F (160C) |  Time: 6 minutes (test in your oven for accurate time) | Peel: Hot

  1. Remove plastic lid.
  2. Tape imaged sublimation paper onto your mug. Place the image toward the mug. 
  3. Place & center product inside the shrink wrap.
  4. Use a heat gun on a low setting to shrink the wrap to the contour of the product. Begin with the side away from the transfer first. Ensure the wrap only encases the sides of the product leaving the top and bottom open.
  5. Ensure that you have set the correct temperature & time for your convection oven.
  6. Place the mug into your convection oven and close the convection oven's door.
  7. Once the time is done, peel the shrink sleeve with the sublimation paper immediately.
  8.  Dunk in warm water. Leave on the table to dry.



Available Downloads

Customer Reviews

Be the first to write a review
0%
(0)
0%
(0)
0%
(0)
0%
(0)
0%
(0)
aaa

Drawer Title

Similar Products

{"statementLink":"","footerHtml":"","hideMobile":false,"hideTrigger":false,"disableBgProcess":false,"language":"en","position":"left","leadColor":"#e5232e","triggerColor":"#e5232e","triggerRadius":"50%","triggerPositionX":"right","triggerPositionY":"bottom","triggerIcon":"settings","triggerSize":"medium","triggerOffsetX":75,"triggerOffsetY":20,"mobile":{"triggerSize":"medium","triggerPositionX":"right","triggerPositionY":"bottom","triggerOffsetX":10,"triggerOffsetY":75,"triggerRadius":"50%"}}
true