Skip to content
en
USD

Free Shipping on Orders $250+ | Shop New Sublimation Blanks Today

Buy Now

Joto Finder

Unified Database (Joto + investigation)

Filter for technology, material, peel and difficulty

Heat Press Settings Finder

Search and filter settings by technology, material, peel, and difficulty






Note: Values are typical ranges. Actual calibration varies by press, thickness, coating, and ink. Always test and use an IR thermometer and a protective sheet when applicable.


Pro Tips

Temperature

Always run a test on sample material before the final application. Heat press calibration may vary.

Time

Time may vary depending on the thickness of the material and the brand of the heat press. Adjust gradually.

Pressure

Make sure the pressure is uniform across the entire surfice. Uneven pressure can cause adhesion failures.

Troubleshooting

Faded Colors

Cause: Low temperature, short time, low pressure, or garment moisture.

Fix:Increase temperature by 5–10 °F (2–5 °C) or add 3–5 seconds. Boost pressure slightly. Pre-press for 3–5 seconds. Check with IR thermometer.

Ghosting / Shadowing

Cause:Transfer moved during lift; peeled too early (especially in sublimation).

Fix:Use heat tape; lift in a firm hinge motion. Allow to cool if it’s a cold/warm peel. Always use fresh protective paper.

Scorch Marks

Cause:Excess heat/time; heat-sensitive polyester; Teflon trapping heat.

Fix:Lower temperature by 10–20 °F (5–10 °C) or reduce time 3–5 seconds. Switch to parchment. Test on scrap fabric first.

aaa

Drawer Title

Similar Products