Pearl Coating™ Sublimation Metal Ornament - Pack of 40

Press Temperature: 360˚F | Press Time: 50 seconds
Light/ Medium Pressure, hot peel

1. Place two pieces of plain paper on your heat press.
2. Tape imaged sublimation paper to the ornament with heat tape.
   The printable sides should be facing each other.
3. Place the ornament with taped imaged sublimation paper in heat press with the paper on top.
4. Place a piece of plain paper on top.
5. Press at 360˚F for 50 seconds.
   Note: Do NOT use a Teflon sheet when pressing.
6. Once pressing is done, immediately peel off sublimation paper.
7. Leave ornament to cool on a table.
8. Repeat Steps 1-7.

Press Temperature: 360˚F | Press Time: 50 seconds
Light/ Medium Pressure, hot peel

1. Place two pieces of plain paper on your heat press.
2. Tape imaged sublimation paper to the ornament with heat tape.
   The printable sides should be facing each other.
3. Place the ornament with taped imaged sublimation paper in heat press with the paper on top.
4. Place a piece of plain paper on top.
5. Press at 360˚F for 50 seconds.
   Note: Do NOT use a Teflon sheet when pressing.
6. Once pressing is done, immediately peel off sublimation paper.
7. Leave ornament to cool on a table.
8. Repeat Steps 1-7.