Skip to content
en
USD

FREE SHIPPING ON ORDERS OVER $400* - $14.99 Flat Rate Shipping for Orders Below 150lbs!

Eligible for Free Shipping on Orders of $400 or More

iLumipiX™ Sublimation HD Panels (Clear Gloss) CLEARANCE - Pack of 10

Regular price $68.10

B-WDR-16X20-CG

  • 12" x 20"
  • 16" x 20"
  • 24" x 36"

ilumipix™ Aluminum HD Photo Panels support high-definition, vibrant colors coupled with superior fade, moisture, stain, and scratch-resistant properties. They are great for commercial, fine art, home décor, and wall decorations, souvenir boards, and photo showcases. Available Clear Gloss.

Stamps Shipping Image
iLumipiX™ Sublimation HD Panels (Clear Gloss) CLEARANCE - Pack of 10 - Joto Imaging Supplies US
iLumipiX™ Sublimation HD Panels (Clear Gloss) CLEARANCE - Pack of 10

ilumipix™ HD Photo Panels are specially coated aluminum metal sheets designed for sublimation.  They are ideal for showcasing fine art high definition photo prints with the most brilliant colors, highest dynamic range, and best contrasts of all available printing technologies. With an extremely durable scratch-resistant surface that is waterproof, these photo panels can be cleaned easily with a damp cloth.

  • Images have Vibrant & Vivid Colors
  • High Quality Aluminum Metal
  • Fade and Scratch Resistant
  • High Profits, High Margins
  • Consistent Flat Surface
  • Designed for Sublimation
  • Large Selection of Sizes
  • White Glossy finish Available
Compatible Technology Sublimation
FCC Attribute Yes
Finish Clear Gloss
Metal Face Down
SIP Attribute Yes
Thickness 0.045"
Unit Sell case
Peel Hot
Equipment
Image
Pressure Light
Application Temperature 400°F (205°C)
Time 65-110 seconds
Pressing Instructions
  1. Remove plastic cover from the metal
  2. Place Nomex felt on the base of the heat press. (important)
  3. Place silicon sheet on top of Nomex felt.
  4. Place imaged sublimation paper face up in the press and hover the press over it for 10-20 seconds to remove any moisture. (recommended)
  5. Remove imaged sublimation paper from the heat press. And place on a table
  6.  With the imaged paper face-up on the table, place the metal on top of the paper with the printable side of the metal face down. Tape both metal and paper together with heat tape.
  7. Flip metal and paper over and place in the heat press with paper on top.
  8. Cover with polyester fabric (important)
  9. Press at 400F for 65-120 seconds using light pressure (time depending on the size of the metal. Please refer to our downloadable instructions for more accurate time)
  10.  Remove polyester fabric, let cool before removing the paper.

Note: Recommended cooling on a cold surface for 120-180 seconds (2-3mins).
IMPORTANT: be careful not to let the paper shift across the surface of the object, or you may create a “ghost” image.
WARNING: Metal is extremely hot after pressing, DO NOT handle with bare hands.
NOTE: Extra care should be taken when handling the metal hot. The metal is vulnerable to damage while it is hot. Do not use a Teflon sheet when pressing

Heat Press Size



Available Downloads

Customer Reviews

Be the first to write a review
0%
(0)
0%
(0)
0%
(0)
0%
(0)
0%
(0)
aaa

Drawer Title

Similar Products