DTF Films

DTF stands for Direct To Film. This technique involves printing your design directly onto a film and then transferring it to a T-shirt made of cotton, polyester, or their blends, regardless of their color, as it can work with white ink.

The similarity here lies in the production process, as you must print the design before transferring it to the T-shirt. The result is also very similar in feel. Let’s analyze the differences between T-shirt personalisation using DTF printing and low-cost white toner.

DTF is much simpler than white toner, as the white layer is printed at the same time as the color layer (compared to low-cost white toner systems).

with the white toner technique, you will need to press the printed paper A onto paper B to add the adhesive and weed it. This step is the most delicate because the transfer could be damaged and cause expensive production losses if the weeding isn’t done properly. With DTF printing, this step doesn’t exist, saving you time and money.

The finish has almost the same feeling to the touch for both techniques. The main difference is that DTF inks are textile and provide greater elasticity and wear resistance.

In this area, white toner provides a more intense white color.

white toner has much higher printing costs than DTF printing because of the toner and NO CUT transfer papers required for its application. A personalized T-shirt printed with a DTF printer has a 50% lower production cost than a T-shirt printed with white toner.

DTF printing is a technique that can be used mainly on textiles, whereas white toner laser printing opens up a wide range of possible projects. In addition to this type of product, it is also possible to personalize rigid objects in color.

Discover our new and high quality DTF Films and explore our website through the web and make sure that you can choose the best product at Joto Imaging Supplies .Explore now!

Generally, the answer is no. Most DTF printers are engineered specifically for printing on the specially-coated film for which DTF is named. However, the Roland BY-20, which is based on a printer-cutter, can also be used to print (and cut) solvent-printable heat transfer film.

The powder is an adhesive that is activated by heat. Technically speaking, it’s an endothermic reaction. When a certain temperature is reached, the powder melts into the ink forming a permanent bond. Then, when it’s heated again on the heat press, that same reaction occurs and binds the powder and ink to the fabric.