Skip to content
en
USD

FREE SHIPPING ON ORDERS OF SUBLIMATION BLANKS OVER $400 - $14.99 Flat Rate Shipping for Orders Below 150lbs!

Pearl Coating™ 12oz Sublimation Enamel Cup - Pack of 12

Regular price $44.88

B-MUG-EN-10

Enamel mugs are great for outdoors, camping, picnics, and more as they are perfectly safe to place over open flames to heat just about anything — coffee, hot chocolate, beans, wine, soup, or whiskey as they are impact resistant.

Stamps Shipping Image
Pearl Coating™ 12oz Sublimation Enamel Cup - Pack of 12 - Joto Imaging Supplies US
Pearl Coating™ 12oz Sublimation Enamel Cup - Pack of 12

These are classical enamel cup with traditional techniques. These cups have an enamel coating for sublimation printing. The rim is made of Stainless Steel. Perfect for camp counselors, outdoor enthusiasts, people who grow beards, and basically any occasion to wear flannel — or just any coffee or soup fan is fine too.

  • Lead and Cadmium Free and conforms to FDA requirements. 
  • Very light, yet durable 
  • Appeals to both the outdoor enthusiasts and customers who are looking for the retro look when enjoying hot or cold beverages.
  • Size: 12oz
  • Dimensions:  3.1'' x 3.4'' / 8*8.6cm
  • Printing area: 2.6'' x 7.5'' / 6.5*19cm
  • Hand Washing Only.  Dishwasher cleaning may rough the surface of the Enamel product. Hand washing can ensure a smooth and bright surface for many years. If you must use a dishwasher, please use a high temperature and less detergent.

Please note that due to the nature of enamel products, the surface of each mug will differ slightly. You may notice tiny lumps and bumps in some mugs, and the occasional small blemish, mark, and scratch, particularly around the lip. This is the nature of enamel mugs and adds to its rustic look.

Printing Method: 

  • Joto Digital Mug Press - Single Station Includes 2 Elements - 11oz/15oz Mug Element
  • Joto Digital Mug Press -Single Station Includes 4 Elements - 11oz/15oz Mug Element
  • Joto Digital Mug Press -Single Station Includes 7 Elements - 11oz/15oz Mug Element
  • Joto Digital Mug Press - Dual Station Includes 5 Elements- 11oz/15oz Mug Element 
  • Joto Digital Mug Press - 5 Stations - 11oz/15oz Mug Element
  • Convection Oven  - Requires a mug wrap (E-MW-1115)
Brand Pearl Coating™
Color White
Compatible Technology Sublimation
Dependent Quantity No
Dimensions Height: Approx. 3.1" | Diameter: Approx. 3.4"
Dishwasher Safe No
Dye Blocking No
Experience Pack Text Pack
FCC Attribute Yes
Ink Configuration CMY&HDK
Microwave Safe No
Mug Element 11/15 oz Mug
Printable Area Approx. 2.6'' x 7.5'' / 6.5*19cm
Quantity Unit 12 Mugs/ Pack
Self-Weeding No
SIP Attribute Yes
Size 12oz
Unit Sell pack
Peel Hot
Equipment Mug Press
Image Mirror
Pressure Medium
Application Temperature 395°F (201°C)
Time 330 seconds
Mug Element 11/15 oz Mug
Mug Press Imaging Instructions
Mug Press Setup: Before pressing, test the pressure using a blank enamel mug. The pressure should be light. Adjust pressure accordingly.
 
Ensure that your mug press has reached the idle or press temperature before using.
 
Do not use excessive pressure. Doing so will damage your mug press and damage your item.The enamel mug must have the top rim edge hanging out of the mug press. Ensure that the top rim is not affecting the pressure.
  1. Tape imaged sublimation paper onto your mug. Place the image toward the mug.
  2. Ensure that you have set the correct temperature & time for your mug press model. 
  3. Place the mug into your mug press. Ensure the mug press has reached the temperature.
  4. Close Mug Press.
  5. a) Mug presses with idle temperatures will start raising the temperature until press temperature is reached. Then it will start counting down.
    b) Mug presses without an idle temperature will start counting down immediately.
    Note: It is normal to see the temperature lower when you close the press. This has been accounted for.
  6. Once pressing is done, use gloves or a heat-resistant cloth to handle the hot mug. Immediately peel off the sublimation paper.
    Caution: Enamel Mug is extremely hot when in the heat press, do not handle it with bare hands. 
  7. Leave on the table to cool. Do not dunk in water as it may crack the glaze.
For Convection Oven instructions. Image your mugs at 360f for 7 minutes.

Important! You must place two enamel cups in a mug press with the bottom facing each other. It will help to stabilize them.

For time and temperature, please follow the instructions that came with your mug press. 
If you bought a mug press from us, the suggested time and temperature for our Single Station, Double Station, and Multi-Station Mug Press are listed above.
For any other mug presses, please click on the SUPPORT, DOWNLOADS & TEMPLATES tab, and download the instructions from there.

Convection Oven Instructions



Available Downloads

Customer Reviews

Be the first to write a review
0%
(0)
0%
(0)
0%
(0)
0%
(0)
0%
(0)
aaa

Drawer Title

Similar Products