Skip to content
en
USD

FREE SHIPPING ON ORDERS OVER $400* - $14.99 Flat Rate Shipping for Orders Below 150lbs!

Eligible for Free Shipping on Orders of $400 or More

Joto Pearl Coating™ 12oz Sublimation Kids Stainless Steel Bottle with Silicon Straw Cap - Case of 5

Regular price $39.75

B-BTL-001-12-BL

  • Joto Pearl Coating™ 12oz Sublimation Kids Stainless Steel Bottle with Silicon Straw Cap - Case of 5 - Joto Imaging Supplies US
  • Joto Pearl Coating™ 12oz Sublimation Kids Stainless Steel Bottle with Silicon Straw Cap - Case of 5 - Joto Imaging Supplies US

The 12-ounce Kids Stainless Steel Bottle with Silicon Straw Cap is fun sublimation kids water bottle to school or picnics.

Stamps Shipping Image
Joto Pearl Coating™ 12oz Sublimation Kids Stainless Steel Bottle with Silicon Straw Cap - Case of 5 - Joto Imaging Supplies US
Joto Pearl Coating™ 12oz Sublimation Kids Stainless Steel Bottle with Silicon Straw Cap - Case of 5

The 12oz/360ml Kids Stainless Steel Bottle With Silicon Straw Cap is adorable, easy to use and portable. It can be personalized by imprinting kids' favorite designs to bring more fun to their school and daily life.

  • Made of Stainless Steel
  • Comes with an individual box
  • Eco-friendly
  • Available in Pink Cap and Blue Cap

Printing Methods:

  • Joto Digital Mug Press - Single Station Includes 2 Elements - 11oz Mug Element
  • Joto Digital Mug Press -Single Station Includes 4 Elements - 11oz Mug Element
  • Joto Digital Mug Press -Single Station Includes 6 Elements - 11oz Mug Element
  • Joto Digital Mug Press -Single Station Includes 7 Elements - 11oz Mug Element
  • Joto Digital Mug Press - Dual Station Includes 5 Elements- 11oz Mug Element 
  • Joto Digital Mug Press - 5 Stations - 11oz Mug Element
  • Convection Oven  - Requires a mug wrap or shrink sleeve. We recommend W 4.92” x H 7.48” (P-SUB-SF-125190).
    Please remove the lid and straw before placing the jar in a convection oven
Compatible Technology Sublimation
Dishwasher Safe No
FCC Attribute Yes
Microwave Safe No
Mug Element Water Bottle
Recommended Shrink Sleeve W 4.92” x H 7.48” (P-SUB-SF-125190)
SIP Attribute Yes
Size 12oz
Unit Sell pack
Peel Hot
Equipment Mug Press or Convection Oven
Image Mirror
Pressure
Application Temperature 360°F (180°C)
Time
Mug Element Water Bottle
Mug Press Imaging Instructions

Press Temperature: 360˚F (180˚C) for 60 seconds
Medium Pressure, Hot peel

  1. Remove lid and straw. Make sure you are using Bottle element.
  2. Tape imaged sublimation paper onto your bottle. Place image facing the bottle.
  3. Set the mug press at 360˚F for 60 seconds. If your press has an idle and press temperature setting, adjust the time accordingly.
  4. Ensure mug press has reached temperature. Place the bottle into your mug press. Close Mug Press.
  5. Once pressing is done, open mug press, and take bottle out of press.
    Use gloves or heat resistant cloth to handle the hot bottle.
  6. Peel sublimation paper off.
  7. Leave on table to cool. Do not dunk in water.
    Caution:  Bottle is extremely hot when in the mug press, do not handle with bare hands

Note: Temperature and time settings are only a guide/starting point, some mug presses may require some fine tweaking of the temperature and time.  

Convection Oven Instructions

Curing Temperature: 360˚F for 4 minutes, Hot peel

  1. Remove the lid and straw. Design your image and print it out on sublimation paper with sublimation ink printer.  
  2. Tape imaged sublimation paper onto bottle.
  3. Place and center the product inside the shrink film/sleeve W 4.92” x H 7.48” (P-SUB-SF-125190).
  4. Use heat gun on low setting to shrink the wrap to the contour of the product. Begin with the side away from the transfer first. Ensure the wrap only encases the sides of the product leaving top and bottom open.
  5. Repeat above steps for each item to include in production run.
  6. Set the convection oven at 360˚F for 4 minutes
  7. Ensure convection oven has reached temperature, place the bottles in the preheated oven.  
  8. Close Convection oven.
  9. Once curing is done, open convection oven, and take the bottle out of the oven. Use gloves or heat resistant cloth to handle the hot bottle.
  10. Peel sublimation paper and shrink film off and leave it to cool off completely.
    Caution:  Bottle is extremely hot when in the mug press, do not handle with bare hands

Note: Temperature and time settings are only a guide/starting point, some convection ovens may require some fine tweaking of the temperature and time.  




Available Downloads

Customer Reviews

Be the first to write a review
0%
(0)
0%
(0)
0%
(0)
0%
(0)
0%
(0)
aaa

Drawer Title

Similar Products

{"statementLink":"","footerHtml":"","hideMobile":false,"hideTrigger":false,"disableBgProcess":false,"language":"en","position":"left","leadColor":"#e5232e","triggerColor":"#e5232e","triggerRadius":"50%","triggerPositionX":"right","triggerPositionY":"bottom","triggerIcon":"settings","triggerSize":"medium","triggerOffsetX":75,"triggerOffsetY":20,"mobile":{"triggerSize":"medium","triggerPositionX":"right","triggerPositionY":"bottom","triggerOffsetX":10,"triggerOffsetY":75,"triggerRadius":"50%"}}
true