Skip to content

Welcome to Joto Imaging Supplies. 1 to 2 day Shipping!

Our Nashville warehouse is experiencing delays. We appreciate your patience and understanding during this time.

Pearl Coating™ 20oz Sublimation Stainless Steel White Tumbler - Pack of 5

Regular price $44.75


Travel in style with Joto's 20oz tumblers. These beautiful tumblers are double-wall stainless steel vacuum insulated.

Each tumbler comes with a plastic lid, however, it does not close.

Pearl Coating™ 20oz Sublimation Stainless Steel White Tumbler - Pack of 5 - Joto Imaging Supplies US
Pearl Coating™ 20oz Sublimation Stainless Steel White Tumbler - Pack of 5

20oz Stainless Steel Tumblers that are perfect for hot drinks or cold drinks. They have standard designs that fit in most cup holders. 

Personalize with a logo, monogram, or your own design, and keep your cold drinks cold and your hot drinks hot! It has a narrow bottom that fits most standard cup holders.

  • Made of Stainless Steel
  • Slot to sip drink – does not close.

Printing Methods:

  • Convection Oven  - Requires a Shrink sleeve. We recommend W 5.9” x H 9.84” (P-SUB-SF-150250).
    Please remove the lid before placing it in a convection oven
Brand Pearl Coating™
Color White
Compatible Technology Sublimation
Dependent Quantity No
Dishwasher Safe No
FCC Attribute Yes
Microwave Safe No
Mug Element Convection Oven Only
Printable Area 3.4" x 6.7" (8.7 x1 7cm)
Quantity Unit 5 Tumblers/ Pack
Recommended Shrink Sleeve W 5.9” x H 9.84” (P-SUB-SF-150250)
SIP Attribute Yes
Size 20oz
Unit Sell pack
Equipment Convection Oven
Image Mirror
Application Temperature
Mug Element Convection Oven Only
Mug Press Imaging Instructions
Convection Oven Instructions

Press Temperature: 320°F |  Time: 6 minutes (test in your oven for accurate time) | Peel: Hot

  1. Print your design. Don't forget to mirror.
  2. Secure your transfer to the tumbler using heat resistant tape. The transfer should not extend past the edges of the tumbler.
  3. Place the tumbler inside the shrink wrap centering it as best you can.
  4. Use a heat gun on a low setting to shrink the wrap to the contour of the tumbler, it is best to start on the side away from the transfer first.
  5. Repeat steps 2 through 4 for each item you wish to sublimate in the production run.
  6. When the items are ready place them into a preheated convection oven.
  7. Once the item is finished sublimating, remove the shrink wrap and sublimation paper. It may break into smaller pieces that just have to be pulled off the item.
  8. Leave on the table to cool down.

Available Downloads


Drawer Title

Similar Products