The most cost-efficient gas solution for burr-free metal cutting with the xTool MetalFab. Only compatible with xTool MetalFab.
Note: The air compressor and air dryer must be used together to ensure clean air enters the system, for optimal cutting results and a longer equipment lifespan.
- Cut metal with just air: Burr-free cuts of 4 mm stainless steel, 4 mm aluminum, or 3 mm brass at 87 PSI using the xTool SaveGas™ nozzle, air compressor, and air dryer.
- Save on gas: No more nitrogen or argon cylinder refills. The system runs on ambient air and electricity.
- HyperPure™ filtration: 3-stage filters remove 99.999% of oil and dust and 99.99% of moisture from the compressed air.
- Compact design: Just 0.066 m³, smaller than industrial units and more convenient than gas cylinders.
- Powerful and reliable: Max. 145 PSI air pressure, 2,200 W motor, 20 L tank, 0–145 PSI recovery in 45 seconds, stable output from -10 °C to 40 °C.
Specifications
xTool Selected Air Compressor
- Max. air pressure: 145 PSI (1.0 MPa)
- Working air pressure: 87–114 PSI (0.6–0.79 MPa)
- Tank capacity: 5.3 gal (20 L)
- Rated power: 2,200 W
- Dimensions: 18.11" × 20.87" × 10.63" (460 × 530 × 270 mm)
- Weight: 35.27 lbs (16 kg)
- Operating voltage: 220 V
xTool Selected Air Dryer
- Filtration: 3-stage (99.999% oil and dust removal)
- Dew point: 36–50 °F (2–10 °C)
- Air inlet temperature: ≤113 °F (45 °C)
- Rated power: 380 W
- Dimensions: 15.83" × 13.98" × 8.94" (402 × 355 × 227 mm)
- Weight: 23.81 lbs (10.8 kg)
The Air Dryer–only option can be used with your own air compressor if it has a rated pressure over 145 PSI (1.0 MPa) and airflow over 7 CFM @ 87 PSI (200 L/min @ 0.6 MPa).
