Paropy™ Heat Transfer Paper CL Tattoo - Pack of 25

Edit the size shape of your image. PRINT MIRROR IMAGE
Note: Tattoo paper consists of two sets of papers. Tattoo printing paper and adhesive paper.

Print image on the glossy side of the tattoo paper. *Set the printer settings to 120g or a thicker/heavier paper setting.

Attaching the adhesive to the printed sheet. The adhesive is very sticky, try not to touch it with your fingers as it will stick to you. Peel back an inch of
the adhesive along the top of the sheet. Attach to the printed sheet and slowly combine the two sheets.

Press out any air bubbles if they appear. Use a ruler is an ideal tool in this regard.

Use a pair of scissors or craft knife to cut out your image. Cut as close as you can to the image.

Peel off the glossy adhesive film from the image (this is the adhesive sheet from Step 4). When you peel off the glossy adhesive film, the adhesive will stay on the image.

Place the imaged paper onto your skin. Rub well.

Next, wet some tissues or a towel and dab on the tattoo. Dab evenly for around 10 seconds.

Once the paper has been wet, the backing paper will slip off easily. Slip off the paper and you will be left with the tattoo image on your skin! Let the image dry before touching.